Embroidery patches or iron-on patches on jackets can be a great way to customize your clothing and show off your personal style. However, there may come a time when you want to remove these patches. This article will provide step-by-step instructions on how to remove both sewn-on and iron-on embroidery patches from jackets. So, let’s get started!
Remove Sewn-on Embroidery Patches
Step 1: Gather the necessary tools To remove a sewn-on embroidery patch, you will need a seam ripper, small sharp scissors, and a clean cloth.
Step 2: Turn the jacket inside out Carefully turn the jacket inside out to gain access to the backside of the embroidery patch. Be gentle to avoid damaging the fabric.
Step 3: Locate the stitches Examine the patch and locate the stitches that hold it in place. These stitches are usually visible on the backside of the jacket.
Step 4: Use the seam ripper Using the seam ripper, carefully insert the pointed end under the stitches that secure the patch. Gently push the seam ripper forward to cut the thread. Repeat this process for all the stitches.
Step 5: Remove residual threads Once all the stitches have been severed, gently pull the patch away from the jacket. If there are any residual threads remaining, carefully cut them with small sharp scissors.
Step 6: Clean the area After removing the patch, use a clean cloth to wipe away any remaining threads or debris. You may also consider using a fabric shaver or lint roller to remove any excess fuzz from the area.
Remove Iron-on Embroidery Patches
Step 1: Gather the necessary tools To remove an iron-on embroidery patch, you will need a garment steamer, iron, ironing board, and a clean cloth.
Step 2: Preheat the iron Preheat your iron to the lowest heat setting suitable for your jacket’s fabric. Place the jacket on the ironing board with the patch facing up.
Step 3: Cover the patch with a cloth Lay a clean cloth over the patch to protect the fabric. Make sure the cloth fully covers the patch.
Step 4: Steam the patch Hold the garment steamer close to the patch, and steam it for about 10-15 seconds. The steam will help to loosen the adhesive on the back of the patch.
Step 5: Apply heat Immediately after steaming, apply the heated iron on top of the cloth-covered patch. Press the iron down for approximately 10-15 seconds, applying gentle pressure. The heat will further loosen the adhesive.
Step 6: Slowly peel off the patch Once the adhesive has been softened, carefully peel off the patch from one corner. If it doesn’t come off easily, apply more steam and heat as necessary until the patch can be removed completely.
Step 7: Clean the area After removing the patch, use a clean cloth to wipe away any leftover adhesive residue. You can also use a mild adhesive remover to aid in the removal process. Ensure that no traces of adhesive or residue remain on the fabric.
Remember, it’s essential to handle both sewn-on and iron-on embroidery patches with care to avoid damaging the jacket. Following these instructions will help you successfully remove the patches while preserving the integrity of your jacket.
There are many bling garment accessories such as rhinestones, rhinestone transfers, rhinestone sheets, sequin patches, etc. You could also find some interesting patches there. Welcome to our homepage to find more surprises!
E-mail: [email protected]
What’s App: +86 18666627048